Check space left
================
Dateisystem    Größe Benutzt Verf. Verw% Eingehängt auf
/dev/root        15G    7,2G  6,5G   53% /
devtmpfs        430M       0  430M    0% /dev
tmpfs           463M     46M  417M   10% /dev/shm
tmpfs           463M    6,4M  456M    2% /run
tmpfs           5,0M    4,0K  5,0M    1% /run/lock
tmpfs           463M       0  463M    0% /sys/fs/cgroup
/dev/mmcblk0p1  253M     49M  204M   20% /boot
tmpfs            93M    4,0K   93M    1% /run/user/1000

Check for dependencies
======================
python 2.7.16-1 install ok installed
python-pip 18.1-5+rpt1 install ok installed
git 1:2.20.1-2+deb10u3 install ok installed
libi2c-dev 4.1-1 install ok installed
python-serial 3.4-4 install ok installed
python-rpi.gpio 0.7.0-0.1~bpo10+4 install ok installed
i2c-tools 4.1-1 install ok installed
python-smbus 4.1-1 install ok installed
scratch 1.4.0.6~dfsg1-6 install ok installed

I2C still in blacklist
SPI still in blacklist


Check for addition in /modules
==============================
I2C-dev already there
i2c-bcm2708 already there
spi-dev already there


Hardware revision
=================
RPI3B+ Pi 3 Model B+ v1.3

Check the /dev folder
=====================
i2c-1
spidev0.0
spidev0.1
ttyAMA0

USB device status
=================
Bus 001 Device 005: ID 1a2c:2d23 China Resource Semico Co., Ltd 
Bus 001 Device 004: ID 30fa:0300  
Bus 001 Device 006: ID 0424:7800 Standard Microsystems Corp. 
Bus 001 Device 003: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Bus 001 Device 002: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc_otg/1p, 480M
    |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
        |__ Port 1: Dev 3, If 0, Class=Hub, Driver=hub/3p, 480M
            |__ Port 1: Dev 6, If 0, Class=Vendor Specific Class, Driver=lan78xx, 480M
            |__ Port 2: Dev 4, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
            |__ Port 3: Dev 5, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
            |__ Port 3: Dev 5, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M
Raspbian for Robots Version
===========================
cat: /home/pi/di_update/Raspbian_For_Robots/Version: Datei oder Verzeichnis nicht gefunden


Hostname
========
raspberrypi


Checking I2C bus for devices
============================

Checking I2C bus 0
==================
NOTE: it is normal for this one to fail
Error: Could not open file `/dev/i2c-0' or `/dev/i2c/0': No such file or directory

Checking I2C bus 1
==================
     0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
00:          -- -- -- -- -- -- -- -- -- -- -- -- -- 
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
70: -- -- -- -- -- -- -- --                         

Checking for firmware version
=============================