Check space left ================ Filesystem Size Used Avail Use% Mounted on /dev/root 29G 3.7G 24G 14% / devtmpfs 430M 0 430M 0% /dev tmpfs 463M 85M 378M 19% /dev/shm tmpfs 463M 13M 451M 3% /run tmpfs 5.0M 4.0K 5.0M 1% /run/lock tmpfs 463M 0 463M 0% /sys/fs/cgroup /dev/mmcblk0p1 253M 48M 205M 19% /boot tmpfs 93M 12K 93M 1% /run/user/1000 Check for dependencies ====================== python 2.7.16-1 install ok installed python-pip 18.1-5+rpt1 install ok installed git 1:2.20.1-2+deb10u3 install ok installed libi2c-dev 4.1-1 install ok installed python-serial 3.4-4 install ok installed python-rpi.gpio 0.7.0-0.1~bpo10+4 install ok installed i2c-tools 4.1-1 install ok installed python-smbus 4.1-1 install ok installed scratch 1.4.0.6~dfsg1-6 install ok installed I2C still in blacklist SPI still in blacklist Check for addition in /modules ============================== I2C-dev already there i2c-bcm2708 already there spi-dev already there Hardware revision ================= RPI3 Pi 3 Model B v1.2 Check the /dev folder ===================== ttyAMA0 USB device status ================= Bus 001 Device 005: ID 046d:c069 Logitech, Inc. M-U0007 [Corded Mouse M500] Bus 001 Device 004: ID 03f0:304a HP, Inc Slim Keyboard Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. SMC9514 Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc_otg/1p, 480M |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/5p, 480M |__ Port 1: Dev 3, If 0, Class=Vendor Specific Class, Driver=smsc95xx, 480M |__ Port 3: Dev 4, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M |__ Port 3: Dev 4, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M |__ Port 4: Dev 5, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M Raspbian for Robots Version =========================== cat: /home/pi/di_update/Raspbian_For_Robots/Version: No such file or directory Hostname ======== raspberrypi Checking for Atmega chip ======================== avrdude: Version 5.10, compiled on Jun 18 2012 at 12:38:29 Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/ Copyright (c) 2007-2009 Joerg Wunsch System wide configuration file is "/etc/avrdude.conf" User configuration file is "/root/.avrduderc" User configuration file does not exist or is not a regular file, skipping Using Port : unknown Using Programmer : gpio AVR Part : ATMEGA328P Chip Erase delay : 9000 us PAGEL : PD7 BS2 : PC2 RESET disposition : dedicated RETRY pulse : SCK serial program mode : yes parallel program mode : yes Timeout : 200 StabDelay : 100 CmdexeDelay : 25 SyncLoops : 32 ByteDelay : 0 PollIndex : 3 PollValue : 0x53 Memory Detail : Block Poll Page Polled Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- --------- eeprom 65 5 4 0 no 1024 4 0 3600 3600 0xff 0xff flash 65 6 128 0 yes 32768 128 256 4500 4500 0xff 0xff lfuse 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00 hfuse 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00 efuse 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00 lock 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00 calibration 0 0 0 0 no 1 0 0 0 0 0x00 0x00 signature 0 0 0 0 no 3 0 0 0 0 0x00 0x00 Programmer Type : GPIO Description : Use sysfs interface to bitbang GPIO lines avrdude: AVR device initialized and ready to accept instructions Reading | ################################################## | 100% 0.00s avrdude: Device signature = 0x1e950f avrdude: safemode: lfuse reads as FF avrdude: safemode: hfuse reads as DA avrdude: safemode: efuse reads as 5 avrdude: safemode: lfuse reads as FF avrdude: safemode: hfuse reads as DA avrdude: safemode: efuse reads as 5 avrdude: safemode: Fuses OK avrdude done. Thank you. Checking I2C bus for devices ============================ Checking I2C bus 0 ================== NOTE: it is normal for this one to fail Error: Could not open file `/dev/i2c-0' or `/dev/i2c/0': No such file or directory Checking I2C bus 1 ================== Error: Could not open file `/dev/i2c-1' or `/dev/i2c/1': No such file or directory Checking for firmware version ============================= GrovePi has firmware version: 1.4.0