Check space left
================
Sys. de fichiers Taille Utilisé Dispo Uti% Monté sur
/dev/root           15G    3,8G   11G  27% /
devtmpfs           433M       0  433M   0% /dev
tmpfs              438M       0  438M   0% /dev/shm
tmpfs              438M     12M  426M   3% /run
tmpfs              5,0M    4,0K  5,0M   1% /run/lock
tmpfs              438M       0  438M   0% /sys/fs/cgroup
/dev/mmcblk0p1      42M     23M   19M  55% /boot
tmpfs               88M    4,0K   88M   1% /run/user/1000

Check for dependencies
======================
python 2.7.13-2 install ok installed
python-pip 9.0.1-2+rpt2 install ok installed
git 1:2.11.0-3+deb9u7 install ok installed
libi2c-dev 3.1.2-3 install ok installed
python-serial 3.2.1-1 install ok installed
python-rpi.gpio 0.6.5~stretch-1 install ok installed
i2c-tools 3.1.2-3 install ok installed
python-smbus 3.1.2-3 install ok installed
scratch 1.4.0.6~dfsg1-5 install ok installed

I2C already removed from blacklist
SPI already removed from blacklist


Check for addition in /modules
==============================
I2C-dev already there
i2c-bcm2708 already there
spi-dev already there


Hardware revision
=================
RPI3B+ Pi 3 Model B+ v1.3

Check the /dev folder
=====================
i2c-1
spidev0.0
spidev0.1
ttyAMA0

USB device status
=================
Bus 001 Device 004: ID 046d:c534 Logitech, Inc. Unifying Receiver
Bus 001 Device 005: ID 0424:7800 Standard Microsystems Corp. 
Bus 001 Device 003: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Bus 001 Device 002: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc_otg/1p, 480M
    |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
        |__ Port 1: Dev 3, If 0, Class=Hub, Driver=hub/3p, 480M
            |__ Port 1: Dev 5, If 0, Class=Vendor Specific Class, Driver=lan78xx, 480M
        |__ Port 2: Dev 4, If 0, Class=Human Interface Device, Driver=usbhid, 12M
        |__ Port 2: Dev 4, If 1, Class=Human Interface Device, Driver=usbhid, 12M
Raspbian for Robots Version
===========================
V 10

This version of Raspbian was modified by Modular Robotics on the Buster Raspbian Build.
This version was updated on 17th of October 2020. 


Hostname
========
dex


Checking I2C bus for devices
============================

Checking I2C bus 0
==================
NOTE: it is normal for this one to fail
Error: Could not open file `/dev/i2c-0' or `/dev/i2c/0': No such file or directory

Checking I2C bus 1
==================
     0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
00:          -- 04 -- -- -- -- -- -- -- -- -- -- 0f 
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
30: -- -- -- -- -- -- -- -- -- -- -- -- 3c -- -- -- 
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
70: -- -- -- -- -- -- -- --                         

Checking for firmware version
=============================
GrovePi has firmware version: 1.4.0