===== Log_1 ===== Check space left ================ S. fitxers Mida En ús Lliure %Ús Muntat a /dev/root 15G 3,9G 11G 28% / devtmpfs 426M 0 426M 0% /dev tmpfs 430M 0 430M 0% /dev/shm tmpfs 430M 5,9M 425M 2% /run tmpfs 5,0M 4,0K 5,0M 1% /run/lock tmpfs 430M 0 430M 0% /sys/fs/cgroup /dev/mmcblk0p1 42M 21M 21M 51% /boot tmpfs 86M 0 86M 0% /run/user/1000 /dev/sda1 58G 88M 58G 1% /media/pi/USB_PUE_2 Check for dependencies ====================== python 2.7.9-1 install ok installed python-pip 1.5.6-5 install ok installed git 1:2.1.4-2.1+deb8u3 install ok installed libi2c-dev unknown ok not-installed python-serial 2.6-1.1 install ok installed python-rpi.gpio 0.6.3~jessie-1 install ok installed i2c-tools 3.1.1+svn-2 install ok installed python-smbus 3.1.1+svn-2 install ok installed dpkg-query: no s'ha trobat cap paquet que correspongui amb arduino dpkg-query: no s'ha trobat cap paquet que correspongui amb minicom scratch 1.4.0.6~dfsg1-5 install ok installed wiringPi Not Found (ERR) I2C still in blacklist (ERR) SPI still in blacklist (ERR) Check for addition in /modules ============================== I2C-dev already there i2c-bcm2708 not there (ERR) spi-dev not there (ERR) Hardware revision ================= gpio version: 2.44 Copyright (c) 2012-2017 Gordon Henderson This is free software with ABSOLUTELY NO WARRANTY. For details type: gpio -warranty Raspberry Pi Details: Type: Pi 3, Revision: 02, Memory: 1024MB, Maker: Sony * Device tree is enabled. *--> Raspberry Pi 3 Model B Rev 1.2 * This Raspberry Pi supports user-level GPIO access. Check the /dev folder ===================== i2c-1 spidev0.0 spidev0.1 ttyAMA0 USB device status ================= Bus 001 Device 005: ID 046d:c312 Logitech, Inc. DeLuxe 250 Keyboard Bus 001 Device 004: ID 046d:c05a Logitech, Inc. M90/M100 Optical Mouse Bus 001 Device 006: ID 0781:5581 SanDisk Corp. Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc_otg/1p, 480M |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/5p, 480M |__ Port 1: Dev 3, If 0, Class=Vendor Specific Class, Driver=smsc95xx, 480M |__ Port 2: Dev 6, If 0, Class=Mass Storage, Driver=usb-storage, 480M |__ Port 4: Dev 4, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M |__ Port 5: Dev 5, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M Raspbian for Robots Version =========================== cat: /home/pi/di_update/Raspbian_For_Robots/Version: El fitxer o directori no existeix Hostname ======== raspberrypi Checking for Atmega chip ======================== ./avrdude_test.sh: line 6: avrdude: no s'ha trobat l'ordre Checking I2C bus for devices ============================ Checking I2C bus 0 ================== Error: Could not open file `/dev/i2c-0' or `/dev/i2c/0': No such file or directory Checking I2C bus 1 ================== 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: -- -- -- -- -- -- -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 70: -- -- -- -- -- -- -- -- Checking for firmware version ============================= python: can't open file '/Software/Python/grove_firmware_version_check.py': [Errno 2] No such file or directory ===== Log_2 ===== Check space left ================ S. fitxers Mida En ús Lliure %Ús Muntat a /dev/root 15G 4,0G 11G 29% / devtmpfs 426M 0 426M 0% /dev tmpfs 430M 0 430M 0% /dev/shm tmpfs 430M 5,9M 425M 2% /run tmpfs 5,0M 4,0K 5,0M 1% /run/lock tmpfs 430M 0 430M 0% /sys/fs/cgroup /dev/mmcblk0p1 42M 21M 21M 51% /boot tmpfs 86M 0 86M 0% /run/user/1000 /dev/sda1 58G 88M 58G 1% /media/pi/USB_PUE_2 Check for dependencies ====================== python 2.7.9-1 install ok installed python-pip 1.5.6-5 install ok installed git 1:2.1.4-2.1+deb8u3 install ok installed libi2c-dev unknown ok not-installed python-serial 2.6-1.1 install ok installed python-rpi.gpio 0.6.3~jessie-1 install ok installed i2c-tools 3.1.1+svn-2 install ok installed python-smbus 3.1.1+svn-2 install ok installed dpkg-query: no s'ha trobat cap paquet que correspongui amb arduino dpkg-query: no s'ha trobat cap paquet que correspongui amb minicom scratch 1.4.0.6~dfsg1-5 install ok installed wiringPi Not Found (ERR) I2C still in blacklist (ERR) SPI still in blacklist (ERR) Check for addition in /modules ============================== I2C-dev already there i2c-bcm2708 not there (ERR) spi-dev not there (ERR) Hardware revision ================= gpio version: 2.44 Copyright (c) 2012-2017 Gordon Henderson This is free software with ABSOLUTELY NO WARRANTY. For details type: gpio -warranty Raspberry Pi Details: Type: Pi 3, Revision: 02, Memory: 1024MB, Maker: Sony * Device tree is enabled. *--> Raspberry Pi 3 Model B Rev 1.2 * This Raspberry Pi supports user-level GPIO access. Check the /dev folder ===================== i2c-1 spidev0.0 spidev0.1 ttyAMA0 USB device status ================= Bus 001 Device 005: ID 046d:c312 Logitech, Inc. DeLuxe 250 Keyboard Bus 001 Device 004: ID 046d:c05a Logitech, Inc. M90/M100 Optical Mouse Bus 001 Device 006: ID 0781:5581 SanDisk Corp. Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc_otg/1p, 480M |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/5p, 480M |__ Port 1: Dev 3, If 0, Class=Vendor Specific Class, Driver=smsc95xx, 480M |__ Port 2: Dev 6, If 0, Class=Mass Storage, Driver=usb-storage, 480M |__ Port 4: Dev 4, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M |__ Port 5: Dev 5, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M Raspbian for Robots Version =========================== cat: /home/pi/di_update/Raspbian_For_Robots/Version: El fitxer o directori no existeix Hostname ======== raspberrypi Checking for Atmega chip ======================== ./avrdude_test.sh: line 6: avrdude: no s'ha trobat l'ordre Checking I2C bus for devices ============================ Checking I2C bus 0 ================== Error: Could not open file `/dev/i2c-0' or `/dev/i2c/0': No such file or directory Checking I2C bus 1 ================== 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: 03 04 -- -- -- -- -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 60: -- -- 62 -- -- -- -- -- -- -- -- -- -- -- -- -- 70: 70 -- -- -- -- -- -- -- Checking for firmware version ============================= Traceback (most recent call last): File "/home/pi/Desktop/GrovePi/Software/Python/grove_firmware_version_check.py", line 40, in print("GrovePi has firmware version: %s" %grovepi.version()) File "/home/pi/Desktop/GrovePi/Software/Python/grovepi.py", line 266, in version return "%s.%s.%s" % (number[1], number[2], number[3]) TypeError: 'int' object has no attribute '__getitem__' ===== Log_3 ===== Check space left ================ S. fitxers Mida En ús Lliure %Ús Muntat a /dev/root 15G 4,0G 11G 29% / devtmpfs 426M 0 426M 0% /dev tmpfs 430M 0 430M 0% /dev/shm tmpfs 430M 5,9M 425M 2% /run tmpfs 5,0M 4,0K 5,0M 1% /run/lock tmpfs 430M 0 430M 0% /sys/fs/cgroup /dev/mmcblk0p1 42M 21M 21M 51% /boot tmpfs 86M 0 86M 0% /run/user/1000 /dev/sda1 58G 88M 58G 1% /media/pi/USB_PUE_2 Check for dependencies ====================== python 2.7.9-1 install ok installed python-pip 1.5.6-5 install ok installed git 1:2.1.4-2.1+deb8u3 install ok installed libi2c-dev unknown ok not-installed python-serial 2.6-1.1 install ok installed python-rpi.gpio 0.6.3~jessie-1 install ok installed i2c-tools 3.1.1+svn-2 install ok installed python-smbus 3.1.1+svn-2 install ok installed dpkg-query: no s'ha trobat cap paquet que correspongui amb arduino dpkg-query: no s'ha trobat cap paquet que correspongui amb minicom scratch 1.4.0.6~dfsg1-5 install ok installed wiringPi Not Found (ERR) I2C still in blacklist (ERR) SPI still in blacklist (ERR) Check for addition in /modules ============================== I2C-dev already there i2c-bcm2708 not there (ERR) spi-dev not there (ERR) Hardware revision ================= gpio version: 2.44 Copyright (c) 2012-2017 Gordon Henderson This is free software with ABSOLUTELY NO WARRANTY. For details type: gpio -warranty Raspberry Pi Details: Type: Pi 3, Revision: 02, Memory: 1024MB, Maker: Sony * Device tree is enabled. *--> Raspberry Pi 3 Model B Rev 1.2 * This Raspberry Pi supports user-level GPIO access. Check the /dev folder ===================== i2c-1 spidev0.0 spidev0.1 ttyAMA0 USB device status ================= Bus 001 Device 005: ID 046d:c312 Logitech, Inc. DeLuxe 250 Keyboard Bus 001 Device 004: ID 046d:c05a Logitech, Inc. M90/M100 Optical Mouse Bus 001 Device 006: ID 0781:5581 SanDisk Corp. Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc_otg/1p, 480M |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/5p, 480M |__ Port 1: Dev 3, If 0, Class=Vendor Specific Class, Driver=smsc95xx, 480M |__ Port 2: Dev 6, If 0, Class=Mass Storage, Driver=usb-storage, 480M |__ Port 4: Dev 4, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M |__ Port 5: Dev 5, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M Raspbian for Robots Version =========================== cat: /home/pi/di_update/Raspbian_For_Robots/Version: El fitxer o directori no existeix Hostname ======== raspberrypi Checking for Atmega chip ======================== ./avrdude_test.sh: line 6: avrdude: no s'ha trobat l'ordre Checking I2C bus for devices ============================ Checking I2C bus 0 ================== Error: Could not open file `/dev/i2c-0' or `/dev/i2c/0': No such file or directory Checking I2C bus 1 ================== 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: 03 -- -- -- -- -- -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- 3e -- 40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 60: -- -- 62 -- -- -- -- -- -- -- -- -- -- -- -- -- 70: 70 -- -- -- -- -- -- -- Checking for firmware version ============================= Traceback (most recent call last): File "/home/pi/Desktop/GrovePi/Software/Python/grove_firmware_version_check.py", line 40, in print("GrovePi has firmware version: %s" %grovepi.version()) File "/home/pi/Desktop/GrovePi/Software/Python/grovepi.py", line 266, in version return "%s.%s.%s" % (number[1], number[2], number[3]) TypeError: 'int' object has no attribute '__getitem__'