***************************************************************************************************************************************************** ########## wireless info START ########## Report from: 11 Aug 2018 13:31 UTC +0000 Booted last: 11 Aug 2018 00:00 UTC +0000 Script from: 08 Jul 2016 02:16 UTC +0000 ##### release ########################### Distributor ID: Raspbian Description: Raspbian GNU/Linux 9.3 (stretch) Release: 9.3 Codename: stretch ##### kernel ############################ Linux 4.9.80-v7+ #1098 SMP Fri Mar 9 19:11:42 GMT 2018 armv7l unknown unknown GNU/Linux 8250.nr_uarts=1, bcm2708_fb.fbwidth=656, bcm2708_fb.fbheight=416, bcm2708_fb.fbswap=1, vc_mem.mem_base=0x3e200000, vc_mem.mem_size=0x3f600000, dwc_otg.lpm_enable=0, rootfstype=ext4, elevator=deadline, fsck.repair=yes, rootwait ##### lsusb ############################# Bus 001 Device 004: ID 154b:009f PNY Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. SMC9514 Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub ##### lsmod ############################# brcmfmac 292911 0 brcmutil 9863 1 brcmfmac cfg80211 544609 1 brcmfmac rfkill 20851 3 cfg80211 ##### interfaces ######################## auto lo iface lo inet loopback allow-hotplug eth0 iface eth0 inet dhcp auto wlan0 allow-hotplug wlan0 iface wlan0 inet static address 10.10.10.10 netmask 255.255.255.0 up iptables-restore < /etc/iptables.ipv4.cinch.nat ##### ifconfig ########################## eth0: flags=4099 mtu 1500 ether txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73 mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10 loop txqueuelen 1 (Local Loopback) RX packets 4 bytes 180 (180.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 4 bytes 180 (180.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 wlan0: flags=4163 mtu 1500 inet 10.10.10.10 netmask 255.255.255.0 broadcast 10.10.10.255 inet6 fe80::ba27:ebff:feb3:310b prefixlen 64 scopeid 0x20 ether txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 28 bytes 4392 (4.2 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 ##### iwconfig ########################## lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11 Mode:Master Tx-Power=31 dBm Retry short limit:7 RTS thr:off Fragment thr:off Power Management:on ##### route ############################# Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.10.10.0 0.0.0.0 255.255.255.0 U 0 0 0 wlan0 ##### resolv.conf ####################### nameserver 127.0.0.1 ##### iw reg get ######################## Region: Etc/UTC (based on set time zone) global country 00: DFS-UNSET (2402 - 2472 @ 40), (N/A, 20), (N/A) (2457 - 2482 @ 20), (N/A, 20), (N/A), AUTO-BW, NO-IR (2474 - 2494 @ 20), (N/A, 20), (N/A), NO-OFDM, NO-IR (5170 - 5250 @ 80), (N/A, 20), (N/A), AUTO-BW, NO-IR (5250 - 5330 @ 80), (N/A, 20), (0 ms), DFS, AUTO-BW, NO-IR (5490 - 5730 @ 160), (N/A, 20), (0 ms), DFS, NO-IR (5735 - 5835 @ 80), (N/A, 20), (N/A), NO-IR (57240 - 63720 @ 2160), (N/A, 0), (N/A) ##### iwlist channels ################### lo no frequency information. eth0 no frequency information. wlan0 11 channels in total; available frequencies : Channel 01 : 2.412 GHz Channel 02 : 2.417 GHz Channel 03 : 2.422 GHz Channel 04 : 2.427 GHz Channel 05 : 2.432 GHz Channel 06 : 2.437 GHz Channel 07 : 2.442 GHz Channel 08 : 2.447 GHz Channel 09 : 2.452 GHz Channel 10 : 2.457 GHz Channel 11 : 2.462 GHz ##### iwlist scan ####################### lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. Channel occupancy: 4 APs on Frequency:2.412 GHz (Channel 1) 3 APs on Frequency:2.462 GHz (Channel 11) wlan0 Scan completed : Cell 01 - Address: Channel:1 Frequency:2.412 GHz (Channel 1) Quality=37/70 Signal level=-73 dBm Encryption key:on ESSID:"" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 9 Mb/s; 12 Mb/s; 18 Mb/s Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s Mode:Master Extra:tsf=0000000000000000 Extra: Last beacon: 2640ms ago IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK Cell 02 - Address: Channel:1 Frequency:2.412 GHz (Channel 1) Quality=38/70 Signal level=-72 dBm Encryption key:on ESSID:"Home Wifi" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 9 Mb/s; 12 Mb/s; 18 Mb/s Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s Mode:Master Extra:tsf=0000000000000000 Extra: Last beacon: 30ms ago IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Cell 03 - Address: Channel:1 Frequency:2.412 GHz (Channel 1) Quality=50/70 Signal level=-60 dBm Encryption key:on ESSID:"2.4" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 9 Mb/s 18 Mb/s; 36 Mb/s; 54 Mb/s Bit Rates:6 Mb/s; 12 Mb/s; 24 Mb/s; 48 Mb/s Mode:Master Extra:tsf=0000000000000000 Extra: Last beacon: 30ms ago IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Cell 04 - Address: Channel:11 Frequency:2.462 GHz (Channel 11) Quality=57/70 Signal level=-53 dBm Encryption key:on ESSID:"HOME-E6B7" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s Mode:Master Extra:tsf=0000000000000000 Extra: Last beacon: 30ms ago IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK Cell 05 - Address: Channel:1 Frequency:2.412 GHz (Channel 1) Quality=34/70 Signal level=-76 dBm Encryption key:off ESSID:"xfinitywifi" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 9 Mb/s; 12 Mb/s; 18 Mb/s Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s Mode:Master Extra:tsf=0000000000000000 Extra: Last beacon: 30ms ago Cell 06 - Address: Channel:11 Frequency:2.462 GHz (Channel 11) Quality=29/70 Signal level=-81 dBm Encryption key:off ESSID:"" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 9 Mb/s; 12 Mb/s; 18 Mb/s Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s Mode:Master Extra:tsf=0000000000000000 Extra: Last beacon: 30ms ago Cell 07 - Address: Channel:11 Frequency:2.462 GHz (Channel 11) Quality=58/70 Signal level=-52 dBm Encryption key:off ESSID:"xfinitywifi" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s Mode:Master Extra:tsf=0000000000000000 Extra: Last beacon: 30ms ago ##### module infos ###################### [brcmfmac] filename: /lib/modules/4.9.80-v7+/kernel/drivers/net/wireless/broadcom/brcm80211/brcmfmac/brcmfmac.ko license: Dual BSD/GPL description: Broadcom 802.11 wireless LAN fullmac driver. author: Broadcom Corporation firmware: brcm/brcmfmac4356-sdio.bin firmware: brcm/brcmfmac4354-sdio.bin firmware: brcm/brcmfmac43455-sdio.bin firmware: brcm/brcmfmac43430-sdio.bin firmware: brcm/brcmfmac4339-sdio.bin firmware: brcm/brcmfmac43362-sdio.bin firmware: brcm/brcmfmac4335-sdio.bin firmware: brcm/brcmfmac43341-sdio.bin firmware: brcm/brcmfmac43340-sdio.bin firmware: brcm/brcmfmac4334-sdio.bin firmware: brcm/brcmfmac4330-sdio.bin firmware: brcm/brcmfmac4329-sdio.bin firmware: brcm/brcmfmac43241b5-sdio.bin firmware: brcm/brcmfmac43241b4-sdio.bin firmware: brcm/brcmfmac43241b0-sdio.bin firmware: brcm/brcmfmac43143-sdio.bin firmware: brcm/brcmfmac43569.bin firmware: brcm/brcmfmac43242a.bin firmware: brcm/brcmfmac43236b.bin firmware: brcm/brcmfmac43143.bin srcversion: 823E11E97E323ECE07C9DC1 depends: brcmutil,cfg80211 intree: Y vermagic: 4.9.80-v7+ SMP mod_unload modversions ARMv7 p2v8 parm: txglomsz:Maximum tx packet chain size [SDIO] (int) parm: debug:Level of debug output (int) parm: p2pon:Enable legacy p2p management functionality (int) parm: feature_disable:Disable features (int) parm: alternative_fw_path:Alternative firmware path (string) parm: fcmode:Mode of firmware signalled flow control (int) parm: roamoff:Do not use internal roaming engine (int) parm: ignore_probe_fail:always succeed probe for debugging (int) [brcmutil] filename: /lib/modules/4.9.80-v7+/kernel/drivers/net/wireless/broadcom/brcm80211/brcmutil/brcmutil.ko license: Dual BSD/GPL description: Broadcom 802.11n wireless LAN driver utilities. author: Broadcom Corporation srcversion: 389318E018771B5453D0B02 depends: intree: Y vermagic: 4.9.80-v7+ SMP mod_unload modversions ARMv7 p2v8 [cfg80211] filename: /lib/modules/4.9.80-v7+/kernel/net/wireless/cfg80211.ko description: wireless configuration support license: GPL author: Johannes Berg srcversion: A0F58D458E02CAA3DF12155 depends: rfkill intree: Y vermagic: 4.9.80-v7+ SMP mod_unload modversions ARMv7 p2v8 parm: bss_entries_limit:limit to number of scan BSS entries (per wiphy, default 1000) (int) parm: ieee80211_regdom:IEEE 802.11 regulatory domain code (charp) parm: cfg80211_disable_40mhz_24ghz:Disable 40MHz support in the 2.4GHz band (bool) ##### module parameters ################# [brcmfmac] debug: 0 roamoff: 1 [cfg80211] bss_entries_limit: 1000 cfg80211_disable_40mhz_24ghz: N ieee80211_regdom: 00 ##### /etc/modules ###################### i2c-dev cuse spi-dev i2c-bcm2708 ##### modprobe options ################## [/etc/modprobe.d/blacklist-rtl8192cu.conf] blacklist rtl8192cu [/etc/modprobe.d/blacklist-rtl8xxxu.conf] blacklist rtl8xxxu [/etc/modprobe.d/ipv6.conf] alias net-pf-10 off [/etc/modprobe.d/uvcvideo-blacklist.conf] blacklist uvcvideo ##### rc.local ########################## _IP=$(hostname -I) || true if [ "$_IP" ]; then printf "My IP address is %s\n" "$_IP" fi exit 0 ##### pm-utils ########################## find: '/etc/pm/*.d': No such file or directory ##### udev rules ######################## ##### dmesg ############################# [ 2.045386] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, [ 3.700831] brcmfmac: F1 signature read @0x18000000=0x1541a9a6 [ 3.949507] brcmfmac: Firmware version = wl0: Oct 23 2017 03:55:53 version 7.45.98.38 (r674442 CY) FWID 01-e58d219f [ 3.950475] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 7.11.15 Compiler: 1.24.2 ClmImport: 1.24.1 Creation: 2014-05-26 10:53:55 Inc Data: 9.10.39 Inc Compiler: 1.29.4 Inc ClmImport: 1.36.3 Creation: 2017-10-23 03:47:14 [ 4.492070] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 4.492079] brcmfmac: power management disabled [ 4.764912] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 4.765390] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5.857236] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 26.103081] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 28.306305] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready ########## wireless info END ############