C:\Users\mike2\Desktop\updateBP\BrickPi\Firmware_BrickPi\Updating_the_Firmware\Firmware_Loading_Package_2013.07.05>script.bat

C:\Users\mike2\Desktop\updateBP\BrickPi\Firmware_BrickPi\Updating_the_Firmware\Firmware_Loading_Package_2013.07.05>avrdude -P usb -c usbasp -p m328p -U lfuse:w:0xFF:m

avrdude: warning: cannot set sck period. please check for usbasp firmware update.
avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.02s

avrdude: Device signature = 0x1e950f
avrdude: reading input file "0xFF"
avrdude: writing lfuse (1 bytes):

Writing | ################################################## | 100% 0.00s

avrdude: 1 bytes of lfuse written
avrdude: verifying lfuse memory against 0xFF:
avrdude: load data lfuse data from input file 0xFF:
avrdude: input file 0xFF contains 1 bytes
avrdude: reading on-chip lfuse data:

Reading | ################################################## | 100% 0.02s

avrdude: verifying ...
avrdude: 1 bytes of lfuse verified

avrdude: safemode: Fuses OK

avrdude done.  Thank you.


C:\Users\mike2\Desktop\updateBP\BrickPi\Firmware_BrickPi\Updating_the_Firmware\Firmware_Loading_Package_2013.07.05>avrdude -P usb -c usbasp -p m328p -U hfuse:w:0xDA:m

avrdude: warning: cannot set sck period. please check for usbasp firmware update.
avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.05s

avrdude: Device signature = 0x1e950f
avrdude: reading input file "0xDA"
avrdude: writing hfuse (1 bytes):

Writing | ################################################## | 100% 0.02s

avrdude: 1 bytes of hfuse written
avrdude: verifying hfuse memory against 0xDA:
avrdude: load data hfuse data from input file 0xDA:
avrdude: input file 0xDA contains 1 bytes
avrdude: reading on-chip hfuse data:

Reading | ################################################## | 100% 0.02s

avrdude: verifying ...
avrdude: 1 bytes of hfuse verified

avrdude: safemode: Fuses OK

avrdude done.  Thank you.


C:\Users\mike2\Desktop\updateBP\BrickPi\Firmware_BrickPi\Updating_the_Firmware\Firmware_Loading_Package_2013.07.05>avrdude -P usb -c usbasp -p m328p -U efuse:w:0x05:m

avrdude: warning: cannot set sck period. please check for usbasp firmware update.
avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.03s

avrdude: Device signature = 0x1e950f
avrdude: reading input file "0x05"
avrdude: writing efuse (1 bytes):

Writing | ################################################## | 100% 0.02s

avrdude: 1 bytes of efuse written
avrdude: verifying efuse memory against 0x05:
avrdude: load data efuse data from input file 0x05:
avrdude: input file 0x05 contains 1 bytes
avrdude: reading on-chip efuse data:

Reading | ################################################## | 100% 0.02s

avrdude: verifying ...
avrdude: 1 bytes of efuse verified

avrdude: safemode: Fuses OK

avrdude done.  Thank you.


C:\Users\mike2\Desktop\updateBP\BrickPi\Firmware_BrickPi\Updating_the_Firmware\Firmware_Loading_Package_2013.07.05>avrdude -P usb -c usbasp -p m328p -U flash:w:ATmegaBOOT_168_atmega328.hex

avrdude: warning: cannot set sck period. please check for usbasp firmware update.
avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.00s

avrdude: Device signature = 0x1e950f
avrdude: NOTE: FLASH memory has been specified, an erase cycle will be performed
         To disable this feature, specify the -D option.
avrdude: erasing chip
avrdude: warning: cannot set sck period. please check for usbasp firmware update.
avrdude: reading input file "ATmegaBOOT_168_atmega328.hex"
avrdude: input file ATmegaBOOT_168_atmega328.hex auto detected as Intel Hex
avrdude: writing flash (32670 bytes):

Writing | ################################################## | 100% 22.59s



avrdude: 32670 bytes of flash written
avrdude: verifying flash memory against ATmegaBOOT_168_atmega328.hex:
avrdude: load data flash data from input file ATmegaBOOT_168_atmega328.hex:
avrdude: input file ATmegaBOOT_168_atmega328.hex auto detected as Intel Hex
avrdude: input file ATmegaBOOT_168_atmega328.hex contains 32670 bytes
avrdude: reading on-chip flash data:

Reading | ################################################## | 100% 18.87s



avrdude: verifying ...
avrdude: 32670 bytes of flash verified

avrdude: safemode: Fuses OK

avrdude done.  Thank you.


C:\Users\mike2\Desktop\updateBP\BrickPi\Firmware_BrickPi\Updating_the_Firmware\Firmware_Loading_Package_2013.07.05>avrdude -P usb -c usbasp -p m328p -U flash:w:BrickPiFW_Compressed_Communication.cpp.hex

avrdude: warning: cannot set sck period. please check for usbasp firmware update.
avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.02s

avrdude: Device signature = 0x1e950f
avrdude: NOTE: FLASH memory has been specified, an erase cycle will be performed
         To disable this feature, specify the -D option.
avrdude: erasing chip
avrdude: warning: cannot set sck period. please check for usbasp firmware update.
avrdude: reading input file "BrickPiFW_Compressed_Communication.cpp.hex"
avrdude: input file BrickPiFW_Compressed_Communication.cpp.hex auto detected as Intel Hex
avrdude: writing flash (32670 bytes):

Writing | ################################################## | 100% 22.62s



avrdude: 32670 bytes of flash written
avrdude: verifying flash memory against BrickPiFW_Compressed_Communication.cpp.hex:
avrdude: load data flash data from input file BrickPiFW_Compressed_Communication.cpp.hex:
avrdude: input file BrickPiFW_Compressed_Communication.cpp.hex auto detected as Intel Hex
avrdude: input file BrickPiFW_Compressed_Communication.cpp.hex contains 32670 bytes
avrdude: reading on-chip flash data:

Reading | ################################################## | 100% 18.85s



avrdude: verifying ...
avrdude: 32670 bytes of flash verified

avrdude: safemode: Fuses OK

avrdude done.  Thank you.


C:\Users\mike2\Desktop\updateBP\BrickPi\Firmware_BrickPi\Updating_the_Firmware\Firmware_Loading_Package_2013.07.05>avrdude -P usb -c usbasp -p m328p -U eeprom:w:BrickPi_EEPROM_UC2.hex

avrdude: warning: cannot set sck period. please check for usbasp firmware update.
avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.02s

avrdude: Device signature = 0x1e950f
avrdude: reading input file "BrickPi_EEPROM_UC2.hex"
avrdude: input file BrickPi_EEPROM_UC2.hex auto detected as Intel Hex
avrdude: writing eeprom (1024 bytes):

Writing | ################################################## | 100% 11.77s



avrdude: 1024 bytes of eeprom written
avrdude: verifying eeprom memory against BrickPi_EEPROM_UC2.hex:
avrdude: load data eeprom data from input file BrickPi_EEPROM_UC2.hex:
avrdude: input file BrickPi_EEPROM_UC2.hex auto detected as Intel Hex
avrdude: input file BrickPi_EEPROM_UC2.hex contains 1024 bytes
avrdude: reading on-chip eeprom data:

Reading | ################################################## | 100% 0.57s



avrdude: verifying ...
avrdude: 1024 bytes of eeprom verified

avrdude: safemode: Fuses OK

avrdude done.  Thank you.


C:\Users\mike2\Desktop\updateBP\BrickPi\Firmware_BrickPi\Updating_the_Firmware\Firmware_Loading_Package_2013.07.05>