Hi Dexter Support,
FAQ support questions:
- I’m running BusterOS on a RPi 3B.
- I’ve had this GoPiGo3 since February 2018.
I have used the following command:
$ curl -kL dexterindustries.com/update_gopigo3 | bash /dev/stdin --env-local
Inside of a virtual environment. Then I reboot.
I continue to see the message:
gopigo3.FirmwareVersionError: GoPiGo3 firmware needs to be version 1.0.x but is currently version 0.3.4
Is there something I’m doing wrong to update the firmware?
Thanks for your support,